Menu [toggle]

History: ShopClasses

Comparing version 29 with version 38

Bicycle Repair Classes


Here's one of the first things you need to know:
Bicycle Safety Check (PDF 8k)

Here is the other:
How to change a flat

There's no substitute for hands-on practice though, so that's what you'll find here: our Shop Class series will teach you everything you need to know to maintain and tune-up your bike, and entitles you to use the OCBC shop to do so.

The series of four classes repeat every month, and are held Saturdays from 4 to 6 pm. Tuesday classes are from 7:00 to 9:00pm.

There is no need to pre-register for classes if you are starting at the beginning of the series. Just come to the co-op a bit before the first class, (usually) on the first Tuesday or first Saturday of the month.

Class size is limited, and students should bring their own bikes, or may work on one of the Co-op's. If you are planning to start with a class other than the first, call or email the shop to make sure that the class will be held; we will teach the first class to any number of students, but if there is only one person (or no one) at the first class, we will cancel the rest of the series.

The cost is $20/ class, or you may pay with volunteer hours. Current members may re-take classes as often as they wish for free.

Shop classes are best taken in order, especially for beginners, but this is not required.

There are brief descriptions on this page, or you can

look at more detailed outlines here.


1st week: Intro to bike maintenance

(Free for anyone, prerequisite for class series and Bike Drivers' Ed. Days and times vary, see schedule above or calendar for details)
  • Basic mechanical principals
  • Fit adjustments for comfort and efficiency
  • Lubing chain
  • Airing tires
  • Safety Check

Also 1st week: Tires and Flats

(Included with bike purchase; prerequisite for Bike Drivers' Ed)
  • Hands-on remove and replace wheels, with bike on the ground
  • Tire assessment
  • Causes of flats
  • Hands-on tire and tube change

This class will prepare you to fix the most frequent bike problem - flats. You will also learn how to make sure your bike is mechanically safe, and fits properly.

2nd week: Wheels and Bearings

  • How to use the work stands and shop tools
  • Hands-on remove and replace wheels, in the work stand
  • Bearing types, function and assessment
  • Bearing inspection and hands-on adjustment.
  • Wheel and rim types and assessment
  • Demonstration of wheel truing
  • Hands-on spoke and rim maintenance.

This class covers how bearings work, and wear out; and how to keep wheels from wobbling — two of the more mysterious aspects of bike repair for most folks.

3rd week: Cables and Brakes

  • Cable types, function, and assessment
  • Hands-on cable maintenance and adjustment
  • Brake types, function and assessment
  • Hands-on brake pad maintenance and adjustment

This class covers the most vexing and mishandled repair jobs on the bike: you will learn the proper use of tools and how to avoid dangerous and time-consuming mistakes.

4th week: Drivetrain

  • Chain function and assessment
  • Hands-on cleaning and lubrication, and chain breaking
  • Types, function and assessment of:
    • Bottom bracket
    • Gears
    • Shifters
    • Derailleurs
  • Hands-on maintenance and adjustment

This class covers the most complex bike system - you will learn how to keep your bike in top shape for the longest time possible. Best to have taken the other classes first, as it will be assumed you have knowledge of bearings and cables.

Why take these classes?

Understanding what can go wrong with your bike and what the symptoms are, which are safety issues and which are economic issues, and giving enough hands-on practice to help you remember basic tasks is the focus of this class series. To really learn how to fix a bike though, you have to do it a few times, so we encourage students to volunteer at our Wednesday evening Fixathons, when you'll work together with a more skilled mechanic on bikes for our programs or for sale.

Taking the course of Basic Shop classes is also what constitutes co-op membership, so you must take them before extensively using the shop facilities for personal projects. (If you are an experienced mechanic, you can test out of the classes by tuning up one of our bikes for sale — and get volunteer credit while you do so — and only pay the $40 supporting membership fee to use the shop and tools.) The goal is for all members to have basic repair skills, so we don't have to charge labor to members for individual instruction, as some other co-ops do; and for all members to know what beginners have learned, so they can help others more effectively.


Bicycle Repair Classes


Classes for February start on Saturday, February 2nd and Tuesday, February 5th.


Here's one of the first things you need to know:
Bicycle Safety Check (PDF 8k)

Here is the other:
How to change a flat

There's no substitute for hands-on practice though, so that's what you'll find here: our Shop Class series will teach you everything you need to know to maintain and tune-up your bike, and entitles you to use the OCBC shop to do so.

The series of four classes may be taken on Saturdays from 4 to 6pm or Tuesdays from 7:00 to 9:00pm. The series begin on the first Saturday and first Tuesday of every month (except if holidays interfere) and repeat every month, year-round. (The first class in the series always runs a bit long, as it covers the mechanical prerequisite for our Bike Driver's Ed class, and is also our bike-purchasers' free "owner's manual," so allow more like three hours — snacks will be served!).

Shop classes are best taken in order, especially for beginners, but this is not required.

There is no need to pre-register for classes if you are starting at the beginning of the series. Just come to the co-op a bit before the first class, (usually) on the first Tuesday or first Saturday of the month.

Class size is limited, and students should bring their own bikes, or may work on one of the Co-op's. If you are planning to start with a class other than the first, call or email the shop to make sure that the class will be held; we will teach the first class to any number of students, but if there is only one person (or no one) at the first class, we will cancel the rest of the series.

The cost is $20/ class, or you may pay with volunteer hours. Current members may re-take classes as often as they wish for free.

There are brief descriptions on this page, or you can

look at more detailed outlines here.


1st week: Intro to bike maintenance

(Free for anyone, prerequisite for class series and Bike Drivers' Ed. Days and times vary, see schedule above or calendar for details)
  • Basic mechanical principals
  • Fit adjustments for comfort and efficiency
  • Lubing chain
  • Airing tires
  • Safety Check

Also 1st week: Tires and Flats

(Included with bike purchase; prerequisite for Bike Drivers' Ed)
  • Hands-on remove and replace wheels, with bike on the ground
  • Tire assessment
  • Causes of flats
  • Hands-on tire and tube change

This class will prepare you to fix the most frequent bike problem - flats. You will also learn how to make sure your bike is mechanically safe, and fits properly.

2nd week: Wheels and Bearings

  • How to use the work stands and shop tools
  • Hands-on remove and replace wheels, in the work stand
  • Bearing types, function and assessment
  • Bearing inspection and hands-on adjustment.
  • Wheel and rim types and assessment
  • Demonstration of wheel truing
  • Hands-on spoke and rim maintenance.

This class covers how bearings work, and wear out; and how to keep wheels from wobbling — two of the more mysterious aspects of bike repair for most folks.

3rd week: Cables and Brakes

  • Cable types, function, and assessment
  • Hands-on cable maintenance and adjustment
  • Brake types, function and assessment
  • Hands-on brake pad maintenance and adjustment

This class covers the most vexing and mishandled repair jobs on the bike: you will learn the proper use of tools and how to avoid dangerous and time-consuming mistakes.

4th week: Drivetrain

  • Chain function and assessment
  • Hands-on cleaning and lubrication, and chain breaking
  • Types, function and assessment of:
    • Bottom bracket
    • Gears
    • Shifters
    • Derailleurs
  • Hands-on maintenance and adjustment

This class covers the most complex bike system - you will learn how to keep your bike in top shape for the longest time possible. Best to have taken the other classes first, as it will be assumed you have knowledge of bearings and cables.

Why take these classes?

Understanding what can go wrong with your bike and what the symptoms are, which are safety issues and which are economic issues, and giving enough hands-on practice to help you remember basic tasks is the focus of this class series. To really learn how to fix a bike though, you have to do it a few times, so we encourage students to volunteer at our Wednesday evening Apprentice nights, when you'll work together with a more skilled mechanic on bikes for our programs or for sale.

Taking the course of Basic Shop classes is also what constitutes co-op membership, so you must take them before extensively using the shop facilities for personal projects. (If you are an experienced mechanic, you can test out of the classes by tuning up one of our bikes for sale — and get volunteer credit while you do so — and only pay the $40 supporting membership fee to use the shop and tools.) Once you have taken all four classes you can get help ad hoc to learn anything that was not covered — for example, if you want to build a fixed-gear on the cheap (external link).

The goal is for all members to have basic repair skills, so we don't have to charge labor to members for individual instruction, as some other co-ops do; and for all members to know what the classes cover, so they can help each other.



History

Legend: v=view, c=compare, d=diff
Date UserIpComment Version Action
Wed 16 of Jan., 2008 18:47 UTC JSheehan24.14.94.146   38
Current
 v
Wed 16 of Jan., 2008 18:46 UTC JSheehan24.14.94.146 fixy on the cheap 37  v  c  d  
Tue 15 of Jan., 2008 17:25 UTC pgarver68.255.255.135 february dates 36  v  c  d  
Fri 04 of Jan., 2008 01:24 UTC pgarver76.241.113.34 january classes and updated apprentice nights link 35  v  c  d  
Wed 05 of Dec., 2007 18:22 UTC JSheehan68.166.182.41 Dec Tues, fixathon to Apprentice 34  v  c  d  
Wed 24 of Oct., 2007 20:21 UTC JSheehan76.243.201.87 added links to pages 33  v  c  d  
Wed 24 of Oct., 2007 19:53 UTC JSheehan76.243.201.87 start 1st of mo. 32  v  c  d  
Fri 17 of Aug., 2007 03:07 UTC JSheehan76.243.176.101   31  v  c  d  
Fri 17 of Aug., 2007 03:07 UTC JSheehan76.243.176.101 September starts the 8th 30  v  c  d  
Fri 17 of Aug., 2007 03:02 UTC JSheehan76.243.176.101 removed "even if you think you are a great mechanic..." 29  v  c  d  
Fri 17 of Aug., 2007 02:59 UTC JSheehan76.243.176.101 added fixathon link, test out info 28  v  c  d  
Wed 08 of Aug., 2007 19:40 UTC pgarver76.243.183.47   27  v  c  d  
Tue 22 of May, 2007 20:09 UTC JSheehan68.255.171.241 first class wed not tues 26  v  c  d  
Mon 16 of April, 2007 17:49 UTC pgarver68.250.52.147 tuesday classes 7-9 25  v  c  d  
Fri 13 of April, 2007 21:46 UTC JSheehan68.255.171.85 removed series starts... and added Fixathon 24  v  c  d  
Fri 13 of April, 2007 21:22 UTC JSheehan68.255.171.85 intro once again: times 23  v  c  d  
Wed 04 of April, 2007 04:35 UTC JSheehan68.166.182.41 removed special classes 22  v  c  d  
Wed 04 of April, 2007 04:33 UTC JSheehan68.166.182.41   21  v  c  d  
Wed 04 of April, 2007 04:31 UTC JSheehan68.166.182.41   20  v  c  d  
Wed 04 of April, 2007 04:30 UTC JSheehan68.166.182.41 Added intro info 19  v  c  d  
Wed 04 of April, 2007 04:23 UTC JSheehan68.166.182.41 Added intro info 18  v  c  d  
Wed 04 of April, 2007 03:35 UTC JSheehan68.166.182.41   17  v  c  d  
Thu 01 of Feb., 2007 20:58 UTC JSheehan68.255.171.128 removed park tool school 16  v  c  d  
Thu 01 of Feb., 2007 20:58 UTC JSheehan68.255.171.128 added park tool school 15  v  c  d  
Mon 15 of Jan., 2007 20:47 UTC JSheehan68.249.151.165   14  v  c  d  
Fri 29 of Dec., 2006 21:26 UTC JSheehan66.72.161.186 no walk-in observers w/out stands 13  v  c  d  
Thu 09 of Nov., 2006 19:27 UTC JSheehan67.38.254.144   12  v  c  d  
Tue 31 of Oct., 2006 18:48 UTC JSheehan68.254.149.117 clarified free re-take, etc. 11  v  c  d  
Sat 07 of Oct., 2006 20:42 UTC pgarver68.254.148.102   10  v  c  d  
Wed 30 of Aug., 2006 18:04 UTC JSheehan67.38.242.214 added BDEd stuff, 3S's 9  v  c  d  
Wed 09 of Aug., 2006 01:23 UTC pgarver65.43.181.104 update next class dates 8  v  c  d  
Sun 23 of July, 2006 13:32 UTC pgarver67.38.247.102   7  v  c  d  
Fri 30 of June, 2006 17:34 UTC JSheehan67.38.250.165   6  v  c  d  
Wed 01 of March, 2006 05:28 UTC JSheehan68.166.182.41   5  v  c  d  
Mon 06 of Feb., 2006 19:18 UTC pgarver69.218.44.185   4  v  c  d  
Mon 06 of Feb., 2006 18:31 UTC pgarver69.218.44.185 Added link to calendar page 3  v  c  d  
Wed 09 of Nov., 2005 22:41 UTC pgarver68.250.211.140 switched fix a flat link to wiki article 2  v  c  d  
Thu 06 of Oct., 2005 20:56 UTC pgarver70.229.196.192   1  v  c  d